TERMINATION HARDWARE
Pull Cord Terminations
TRADITIONAL INSTALLATION (Approximate installation time: 5 minutes per side.)
+
TURNBUCKLE STP-20-SS (316)
NOTE: Turnbuckle MUST have Locking Nuts fitted.
(Can be mounted at remote end of Pull Cord)
OPTION 1
+
TURNBUCKLE STP-21-SS (316)
NOTE: Turnbuckle MUST have Locking Nuts fitted.
(Can be mounted at remote end of Pull Cord)
OPTION 2
+
PULL CORD THIMBLE STP-40-SS (304)
STP-40-SS
2 PER SIDE
+
HORSESHOE PULL CORD GRIP INSTALLATION STP-50-SS (316)
The installation may use 1 or 2 Horse Shoe Pull Cord Grips.
+
3mm ID 5mm OD UV STABLE FLEXIBLE STAINLESS STEEL CORD STL-10-SS (316)
+
PULL CORD SUPPORT STG-200-SS or STG-350-SS
Guide (Polypropylene)
(304) M10 Rod (304)
WIRE SUPPORTS
EVERY 3M
+
STG-ES-SS (304)
Stainless Steel Guide Sign
STG-ES-P (Polypropylene)
Plastic Guide Sign
STP-ES-SS (304)
Tent Sign
STG-ES-PR (Polypropylene)
Plastic Pull Cord Mount Guide Sign
At a maximum of 30m intervals is recommended plus at the Head, Tail and Transfer.
SIGNS
EVERY 3M
+
M6 SHACKLE
STP-75-SS (316)
For shackle security “Mouse” the shackle after installation.
STP-75-SS
1 PER SIDE
+
MATCHED STAINLESS STEEL COMPENSATION SPRING STP-E60 (304)
These springs are tagged with a stainless steel label noting the compliance.
Other branded devices must have their own compensation spring used. They should be balance matched to the internal spring system so the Pull Cord system is still functioning as a safety critical system and meets the requirements of the standards.
+
Spring Holder Flat Dual Sided, STP-SH-2 (Plated Mild Steel), STP-SH-2-SS (Stainless Steel)
+
Spring Holder Angled Single Sided, STP-SH-1 (Plated Mild Steel), STP-SH-1-SS (Stainless Steel)
STAINLESS STEEL QUICK INSTALLATION (Approximate installation time: 2.5 minutes per side.)
+
TURNBUCKLE STP-20-SS (316)
NOTE: Turnbuckle MUST have Locking Nuts fitted.
(Can be mounted at remote end of Pull Cord)
+
TURNBUCKLE STP-20-SS (316)
NOTE: Turnbuckle MUST have Locking Nuts fitted.
(Can be mounted at remote end of Pull Cord)
+
TURNBUCKLE STP-21-SS (316)
NOTE: Turnbuckle MUST have Locking Nuts fitted.
(Can be mounted at remote end of Pull Cord)
+
PULL CORD SUPPORT STG-200-SS or STG-350-SS
Guide (Polypropylene)
(304) M10 Rod (304)
WIRE SUPPORTS
EVERY 3M
+
STG-ES-SS (304)
Stainless Steel Guide Sign
STG-ES-P (Polypropylene)
Plastic Guide Sign
STP-ES-SS (304)
Tent Sign
STG-ES-PR (Polypropylene)
Plastic Pull Cord Mount Guide Sign
At a maximum of 30m intervals is recommended plus at the Head, Tail and Transfer.
SIGNS
EVERY 3M
+
MATCHED STAINLESS STEEL COMPENSATION SPRING STP-E60 (304)
These springs are tagged with a stainless steel label noting the compliance.
Other branded devices must have their own compensation spring used. They should be balance matched to the internal spring system so the Pull Cord system is still functioning as a safety critical system and meets the requirements of the standards.
+
Spring Holder Flat Dual Sided, STP-SH-2 (Plated Mild Steel), STP-SH-2-SS (Stainless Steel)
+
Spring Holder Angled Single Sided, STP-SH-1 (Plated Mild Steel), STP-SH-1-SS (Stainless Steel)
VECTRAN RAPID INSTALLATION (Approximate installation time: 1 minute per side.)
+
First Guide Supports include 2 sets: Left-Hand and Right-Hand Guides. Universally designed for versatile installation.
First Guide Supports are only available with the Rapid Installation Terminations
STG-FGK
DESIGN DRAWING
+
WING
STL-10-V VECTRAN PULL CORD CLAMPING SYSTEM
STP-55K-SS (304)
+
SECURITY
STL-10-V VECTRAN PULL CORD CLAMPING SYSTEM
STP-56K-SS (304)
+
WING
STL-10-V VECTRAN PULL CORD CLAMPING SYSTEM
STP-55K-P Plastic
+
SECURITY
STL-10-V VECTRAN PULL CORD CLAMPING SYSTEM
STP-56K-P Plastic
+
5mm OD UV STABLE FLEXIBLE LCP PULL CORD STL-10-V
The use of STL-10-V will stop pull cord expansion and contraction due to temperature change. This will also reduce the overall system’s static friction on each guide point. Any other types or sizes of ropes or cables used may not allow the system to function safely and comply with pull tests.
+
CORD SUPPORT STG-200-SS or STG-350-SS
Guide (Polypropylene)
(304) M10 Rod (304)
WIRE SUPPORTS
EVERY 3M
+
STG-ES-SS (304)
Stainless Steel Guide Sign
STG-ES-P (Polypropylene)
Plastic Guide Sign
STP-ES-SS (304)
Tent Sign
STG-ES-PR (Polypropylene)
Plastic Rope Mount Guide Sign
At a maximum of 30m intervals is recommended plus at the Head, Tail and Transfer.
SIGNS
EVERY 3M
+
MATCHED STAINLESS STEEL COMPENSATION SPRING STP-E60 (304)
These springs are tagged with a stainless steel label noting the compliance.
Other branded devices must have their own compensation spring used. They should be balance matched to the internal spring system so the Pull Cord system is still functioning as a safety critical system and meets the requirements of the standards.
+
Spring Holder Flat Dual Sided, STP-SH-2 (Plated Mild Steel), STP-SH-2-SS (Stainless Steel)
+
Spring Holder Angled Single Sided, STP-SH-1 (Plated Mild Steel), STP-SH-1-SS (Stainless Steel)
HARDWARE
CHOOSE YOUR HARDWARE
HOOK/EYE TURNBUCKLE
+
TURNBUCKLE STP-20-SS (316)
NOTE: Turnbuckle MUST have Locking Nuts fitted.
(Can be mounted at remote end of Pull Cord)
STP-20-SS
EYE/EYE TURNBUCKLE
+
TURNBUCKLE STP-21-SS (316)
NOTE: Turnbuckle MUST have Locking Nuts fitted.
(Can be mounted at remote end of Pull Cord)
STP-21-SS
JAW/JAW TURNBUCKLE
+
8mm 316 Stainless Steel
STP-22-SS
EYE/JAW
+
8mm 316 Stainless Steel (pack of 2)
STP-23-SS
STL-10-SS STAINLESS STEEL PULL CORD TERMINATION SYSTEMS
TRADITIONAL
QUICK INSTALL
PULL CORD THIMBLE
+
5mm 304 Stainless Steel
STP-40-SS
PULL CORD GRIP
+
5mm 316 Stainless Steel
STP-50-SS
PLASTIC PULL CORD GRIP KIT
+
Plastic Pull Cord grip with wheel shackle to suit Stainless Steel Lanyard
STP-52K
STL-10-V VECTRAN PULL CORD TERMINATION SYSTEMS
RAPID INSTALL
VECTRAN PULL CORD CLAMP KIT
+
Stainless Steel Pull Cord Clamp With Wheel Shackle to Suit Vectran Lanyard
STP-55K-SS
VECTRAN PULL CORD SECURITY CLAMP KIT
+
Stainless Steel Security Pull Cord Clamp With Wheel Shackle to Suit Vectran Lanyard
STP-56K-SS
FIRST GUIDE SUPPORT
+
First Guide Supports include 2 sets: Left-Hand and Right-Hand Guides. Universally designed for versatile installation.
First Guide Supports are only available with the Rapid Installation Terminations.
STG-FGK
SPARE PARTS/REPLACEMENT
CHOOSE YOUR SPARE PARTS
PULL CORD GRIP
+
Plastic Pull Cord Grip to Suit Stainless Steel Lanyard
STP-52
VECTRAN PULL CORD WING CLAMP
+
Stainless Steel Pull Cord Clamp to Suit Vectran Lanyard
STP-55-SS
VECTRAN PULL CORD SECURITY CLAMP
+
Stainless Steel Security Pull Cord Clamp to Suit Vectran Lanyard
STP-56-SS
WHEEL SHACKLE
+
Wheel Shackle
STP-45-SS
REPLACEMENT WHEEL
+
Replacement Wheel to Suit Wheel Shackle
STP-W
SHACKLE
+
4mm 304 Stainless Steel
STP-70-SS
SHACKLE
+
M6 SHACKLE
STP-75-SS (316)
For shackle security “Mouse” the shackle after installation.
