tension – Stainless steel
Emergency Stop Lanyard device
This Safe-T-Pull device is a Tension Cord Emergency Stop Lanyard system designed for safety applications. Here are some key features and functions:
READ MORE
TENSION CORD SYSTEM: ENHANCED SAFETY ACTIVATION
Tension Cord System: The device uses a pull cord. Tripping or activating the safety system occurs when this cord is subjected to specific conditions.
TRIPPING CONDITIONS: ACTIVATION VIA CORD REMOVAL
Tripping Conditions: Tripping, or the activation of the emergency stop function, can occur under several conditions: When the pull cord is removed: If someone disengages or removes the cord from the device, it triggers an emergency stop.
ACTIVATION BY PULLING: PERSONNEL-INITIATED EMERGENCY STOP
When the pull cord is pulled: If the pull cord is subjected to an emergency stop activation by personnel, it activates the positive drive safety mechanism which initiates an emergency stop function.
OVER-TENSION ACTIVATION: EMERGENCY STOP DUE TO EXCESSIVE PULL CORD TENSION
When the pull cord is over-tensioned: If the pull cord is over-tensioned in set-up or due to other factors the device will trigger an emergency stop.
UNDER-TENSION ACTIVATION: EMERGENCY STOP CAUSED BY INSUFFICIENT PULL CORD TENSION
When the pull cord is under-tensioned: If the pull cord is under-tensioned in set-up or due to other factors the device will trigger an emergency stop.
MANUAL TRIPPING CAPABILITY: CONVENIENT MANUAL ACTIVATION FOR TESTING AND MAINTENANCE
Manual Tripping: The device can also be manually tripped using a reset dial. This is a useful feature for testing and maintenance purposes or for manually stopping the system in emergency situations.
MICRO SWITCHES: ENHANCED SAFETY WITH DIRECT OPENING MECHANISM
Micro Switches: The Safe-T-Pull device is equipped with 2 or 4 direct opening safety micro switches. These safety micro switches are Single Pole Double Throw (S.P.D.T.) change-over switches. They provide a direct opening positive break in electrical signal when the conditions for activation are met.
The Safe-T-Pull device is a safety mechanism designed to stop a machine or conveyor system when certain conditions, such as cord removal, wire slackening, cord over-tensioning, wire activation or manual dial activation, are met. The inclusion of direct opening safety micro switches coupled to a direct opening mechanical action and a reset dial allows for both automated and manual control over the emergency stop function, enhancing safety in industrial or conveyor system applications.
OPTIONS
STEP 2. CHOOSE YOUR OPTIONS
DUAL
STAINLESS STEEL
2 X S.P.D.T
STP-SSB-2
4 X S.P.D.T
STP-SSB-4
LEFT HAND
STAINLESS STEEL
2 X S.P.D.T
STP-SSB-2–LH
4 X S.P.D.T
STP-SSB-4–LH
RIGHT HAND
STAINLESS STEEL
2 X S.P.D.T
STP-SSB-2–RH
4 X S.P.D.T
STP-SSB-4–RH
ADDITIONAL OPTIONS
STEP 3. CHOOSE ADDITIONAL OPTIONS
FIRST GUIDE SUPPORTS
+
FIRST GUIDE SUPPORT: include 2 sets: Left-Hand and Right-Hand Guides. Universally designed for versatile installation.
First Guide Supports are only available with the Quick Installation Terminations.
STG-FGK
REMOTE ISOLATION
+
REMOTE ISOLATION: The lid has a lid locking mechanism that stops the lid from being easily removed when in remote isolation.
-RI
ENTRIES AVAILABLE
+
4 ENTRIES
-4E
STROBES
+
Note: Strobe light utilises one micro switch to activate.
10-100V DC RED STROBE
-S2
110V AC RED STROBE
-S3
240V AC RED STROBE
-S4
STROBES
+
Note: Strobe light utilises one micro switch to activate.
10-100V DC AMBER STROBE
-S6
110V AC AMBER STROBE
-S7
240V AC AMBER STROBE
-S8
HARDWARE
STEP 4. CLICK TO FOLLOW HARDWARDE OPTIONS
OR. INDIVIDUAL HARDWARE AVAILABLE
INDICATOR FLAG
+
YELLOW INDICATION FLAG: The Indication Flag should be fitted when there is more than one device used on the conveyor.
STP-F
COMPENSATION SPRING
+
COMPENSATION SPRING: Compensation Spring is designed to be used with Safe-T-Pull Lanyard Devices only.
Safe-T-Products has replaced the tinned copper crimp on the STP-E60 compensation springs with a stainless-steel crimp for the tether wire.
We now specify stainless-steel crimps on the STP-E60.
STP-E60
SETUP GAUGE
+
SETUP GUAGE: To be supplied with every Safe-T-Pull device. To correctly aid in the setup of the pull rod at the correct 100mm set point.
STP-SUG
DUST BOOT
+
DUST BOOT: Designed to safeguard against dust and water ingress. This protective cover enhances the device’s durability by preventing contaminants from reaching critical components, ensuring reliable operation in harsh environments. By reducing wear and tear, the dust boot helps extend the service life of the Safe-T-Pull.
STP-BOOT
T-BAR GRIP
+
SAFE-T-BAR GRIP: Designed for quick and secure attachment to a lanyard pull cord, the Safe-T-Bar Grip provides a reliable interface for operators. It is fully compatible with our Pull-Safe, Safe-T-Pull, and Stop-Pause-Start devices, and can also be used in conjunction with the Machine-Safe-Ball for enhanced functionality and ease of use.
MS-TBG
60 X 20MM TAG
+
TAG 60 X 20MM: Engraved only equipment tag 304 stainless steel.
TAG-DEVICETAG-SS
+
TAG 60 X 20MM FITTED: Engraved equipment tag fitted to lid tab 304 stainless steel.
TAG-DEVICETAG-SS–FIT
80 X 15MM TAG
+
TAG 80 X 15MM: Engraved only equipment tag 304 stainless steel.
TAG-WIRETAG-SS
+
TAG 80 X 15MM FITTED: Engraved equipment tag fitted to leg 304 stainless steel.
TAG-WIRETAG-SS–FIT
TUNNEL TERMINAL
+
TUNNEL TERMINAL: 6mm Half Block Tunnel Terminals are designed for secure and efficient electrical connections, featuring a compact half block design with included mounting screws for easy installation.
STP-TERM-6
+
TUNNEL TERMINAL: 12mm Full Block Tunnel Terminals are designed for secure and efficient electrical connections, supplied with mounting screws for quick and secure installation.
STP-TERM-12
SPARE PARTS
STEP 5. SPARE PARTS AVAILABLE
REPLACEMENT LID
STAINLESS STEEL
STP-SSB-LID
REPLACEMENT LID REMOTE ISOLATION
STAINLESS STEEL
